« BACK  

New all-electric tube bender extends shape-forming capabilities of aerospace manufacturer

The new Unison all-electric tube bending machine, installed at SL Engineering
The new Unison all-electric tube bending machine, installed at SL Engineering

The aerospace tubular parts manufacturer SL Engineering is continuing its investment in advanced automation with the acquisition of a second all-electric CNC tube bending machine from Unison.

The new machine enhances SL Engineering's manufacturing capabilities, especially its ability to produce more complex tubular shapes. It also extends the size range of tubing that can be bent using all-electric servomotor-controlled movement - to tube and pipe diameters up to 80 mm.

"Engine and aircraft manufacturers are taking advantage of the advanced shape forming capability of state-of-the-art tube bending machines by specifying more complex shapes and highly challenging tighter-radius bends - to save weight and space and eliminate welded joints," says Shaun Stevenson of SL Engineering. "The sophisticated bending capability of Unison machines, which allow greater control over tube clamp and carriage push forces, helps us to achieve these new levels of precision. If we did the same jobs on our old hydraulic machines we would be much more reliant on highly skilled operators to bothset up the machines, and make the parts with additional weld joints, and hence additional cost."

SL Engineering (SLE) is one of Europe's leading Tier 1 suppliers of rigid tube assemblies and precision machined parts for aerospace applications, and supplies components to major engine and airframe programs from commercial Airbus and Boeing aircraft to leading military programs such as the Joint Strike Fighter (JSF). Although the aerospace sector accounts for a large proportion of turnover, SLE also provides parts for industrial gas turbines, marine propulsion, and other critical industry applications.

SLE's business today is characterised by a need for manufacturing flexibility. The average batch is around 5 to 25 parts, and orders can even be for just a single emergency 'aircraft-on-ground' part. Demand for greater precision and shape complexity is another major facet of its work. Until recently, few tubular parts required bends with radii of less than 2D (twice the tube diameter). Today, however SLE regularly receives requests for bends of 1D, and for shapes with minimal straight sections between bends. The use of thinner walled tubing, and expensive specialist materials such as titanium and Inconel are further trends.

These demands are behind the company's moves to all-electric tube bending technology. SLE installed its first such bending machine in 2010 - a 30 mm diameter Breeze from the UK manufacturer Unison. Much of SLE's work is on diameters of 30 mm or less, and most of its current work falls into the sub-50.8 mm range. The first all-electric machine has proved critical for SLE, allowing it to handle small batch set-ups much more efficiently and quickly - with zero or minimal scrap. As a result, the company channels most new work for smaller parts onto the 30mm all-electric machine, and transfers many older parts onto the machine by creating new bending programs as orders come in. After almost four years of operation, the 30 mm machine now produces a significant proportion of SLE's business. SLE typically has anywhere from 500 to 1000 live jobs at any one time.

The latest machine that SLE has acquired, a Unison Breeze 80, now gives the company all-electric CNC tube bending options for tube diameters up to 80 mm. The machine also incorporates a multistack/multiradius tooling capability. This feature is a critical aspect of achieving some of the complex tubular part shapes and multiple bend sequences that are being specified on today's aerospace programs.

"We continue to see many challenging opportunities in the sector, but it does require significant capital investment," adds Stevenson. "The new Unison bender, along with further investments in 5-axis machining, has helped SLE take its manufacturing capability to a new level. We can meet the most complex tube assembly specifications that aerospace companies require today, and the combination of advanced machinery and our know-how gives us a platform to raise the bar even higher, and differentiate SLE from our competitors. Another service we offer to clients who are able to provide us with pre-release drawings, is evaluating manufacturability and advising on the potential for manufacturing and cost saving improvements before final drawing release."

As an example of the exacting specifications that SLE faces, one current part for a military fighter program calls for a shape with multiple 2D bends but minimal straight sections between bends, using thin wall titanium tubing. Tube ovality also has to be less than 5% after bending - as compared with an industry norm of 10% - and the part shape has a positional and length tolerance of just +/- 0.005 inches after bending and welding. As the part is made from titanium, bending must be right first time as adjustments after shape forming are almost impossible. The consistency and repeatability of the Unison machine is a critical enabler for fabricating this part, as well as other titanium tube parts that SLE currently makes.

Another aspect of the advantages of the Unison machine for a contractor such as SLE is the ease of programming. Tubes are often the last parts to be defined and designed - whether they are for an engine or airframe. Using its own bespoke macro-driven CATIA V5 closed-loop CAD/CAM facility, and Unison's three-dimensional simulator, SLE can create new CNC bending programs for the Unison machine very rapidly - providing ideal support for clients that are unable to supply tube/pipe details until the very late stages of projects.

"All-electric tube bending technology has given this client both a rapid return on investment, and a means of tackling emerging challenges such as bending exotic materials," adds Steve Haddrell of Unison.

SL Engineering Ltd has the fullrange of in-house resources required to offer complete solutions for the manufacture of specialised rigid tube assemblies and precision machined components used in some of the most demanding applications in the aerospace, industrial gas turbine, marine, oil and gas, and medical industries. Founded in 1959, SL Engineering has always specialised in high-precision tubular assemblies - from a starting point of products for motorsports applications. Today, the company employs around 50 staff. Its core capabilities include CNC tube manipulation, CMM tube inspection, multi-axis CNC machining for manufacturing complex end fittings, plus all required support processes including welding, brazing, assembly, pressure testing, and NDT (dye penetrant and x-ray inspection). To support its work in aerospace, SL Engineering has attained qualification to many key industry standards including AS9100 (Rev C) aerospace quality management systems, BS EN ISO9001, and NADCAP special process approvals for welding, brazing and NDT. To reinforce its position as a leading tube assembly specialist, SLE has also achieved SC21 award status for the last three consecutive years - making it one of the top performing aerospace organizations in the UK in terms of business performance and continual improvement. This performance has been all the more impressive as SLE also achieved 22% growth in business during 2013.

PUBLISHED: 23 Apr 14 Bookmark and Share
Company:
Unison
Country:
UK
Tel:
+44 1723 582868
Fax:
+44 1723 582379
Email:
alanp@unisonltd.com
Website:
www.unisonltd.com
Other News from Unison:

»
New head of sales & support appointed to meet Unison growth
»
Unison Ltd is increasing its manufacturing capacity and opening a new factory in Virginia, USA
»
All-electric tube bender multiplies productivity for cleaning trolley maker
»
Ultibend improves productivity with new all-electric tube benders
»
Precision tube bending takes next step in evolution
»
Innovative automated tube bending cell allows wheelbarrow manufacturer to almost double manufacturing output
»
World's most powerful all-electric pipe bending machine swings into action at Norwegian shipyard
»
Custom all-electric tube bender will accelerate right-first-time production for precision metal fabricator
»
Custom tube bender eliminates cut-off waste of tubular parts for exercise machines
»
Unison opens its own service and sales office in North Carolina
»
Accurate and cost effective tube bending - a new machine concept from Unison
»
Unison receives its Queen's Award
»
Tube bending pioneer wins Queen's Award
»
Ultra-powerful all-electric pipe bender starts operations at US shipbuilder
»
Second Unison all-electric bending machine for fast-growing tube fabrication specialist
»
Precision aerospace engineers choose Unison tube bending technology
»
Tube manipulation specialist embraces all-electric technology and enjoys fast return on investment
»
All-electric tube bending machine innovator appoints new American support partner
»
UK tube manipulation sector "in robust health" says Unison after open house event
»
Size matters: all-electric tube benders take a MASSIVE step forwards
»
Tube bending CAD/CAM software also accommodates laser tube cutting
»
Faster and smarter tubular parts production
»
Scarborough could be the UK's next 'engineering hotspot' thanks to the new University Technical College
»
Powerful all-electric pipe bending machine boosts manufacturing throughput and accuracy of large-bore hydraulic parts
»
Tube bending specialist accelerates throughput and implements right-first-time manufacturing with the help of all-electric machine
»
Advanced tube bending technology helps British Airways maintain latest-generation aircraft
»
New all-electric tube bender extends shape-forming capabilities of aerospace manufacturer
»
Tube bending leader adds new low-cost entry-point machine to its range
»
Higher-productivity tube bending to be highlighted at Tube 2014
»
Innovative tube bending CADCAM solution
»
Advanced tube benders speed construction of subsea wellhead trees
»
Proof that engineering careers still appeal to UK youngsters!
»
Novel tube bender boosts productivity by 500% for leading American tubular part fabricator
»
Higher-productivity tube bending to be demonstrated at Fabtech
»
Lord Green opens design and manufacturing facility for tube bending innovator
»
More production capacity fuels international expansion of tube bending innovator
»
World's largest all-electric pipe bender ordered by US shipbuilder
»
Record sales for tube bending machine builder Unison
»
Siemens Subsea Products adopts all-electric tube bending for production of subsea hydraulic flying leads
»
Unique robotic tube bending system can dramatically speed production
»
Clean, green production efficiency underpins tube bending machinery upgrades at leading truck parts manufacturer
»
Yorkshire's centre of engineering excellence continues investing for its future
»
Right-first-time tube bending technology to be highlighted at Farnborough
»
Business Secretary Vince Cable visits fast-growing UK machine builder
»
Novel twin-head tube/bar bender provides platform for high throughput automated production
»
Fully-automated production cell increases wheelbarrow frame manufacturing efficiency
»
Architectural metalworker achieves right-first-time output using unique bend correction system
»
Right-first-time tube bending technology to make European premiere at Tube 2012
»
All-electric tube bender provides production versatility for submarine builder
»
Scarborough plays host to hundreds of budding designers and engineers
»
Unison supports World Motorcycle Land Speed Record Attempt
»
Rotating-head tube bender produces ultra-complex part shapes in one fast automatic cycle
»
Unison to support VTube software in the UK
»
First all-electric tube bender for leading European tube bending specialist
»
Record sales for tube bending machine builder Unison
»
Precision aerospace tubular parts fabricator chooses all-electric CNC tube bender to combat emerging challenges
»
Tube bending excellence 2011
»
Integrated all-electric tube bender and cutter delivers competitive advantage to volume tubular part manufacturers
»
Architectural metalwork leader chooses right-first-time tube bender
»
Advanced tube bender will boost flexibility of performance exhaust manufacturing
»
Scarborough continues investing in the UK's engineering future
»
Metalworking machinery leader opened its doors at Scarborough engineering week
»
Boeing Integrated Defense Systems orders bending machine
»
End-former accelerates refurbishment process for automotive parts specialist
»
Advanced tooling added to tube bending portfolio


Industry News:
The PurgEye® 300 Nano
Low cost 1 PPM Weld Purge Monitor®
Huntingdon Fusion Techniques Limited, UK
Roll-Kraft Seminar Session
Outstanding attendance once again at Roll-Kraft's annual regional seminars
Roll-Kraft, USA
Brazing corrugated tubing to stainless steel pipe and cap using UltraFlex Induction Heating
Brazing corrugated tubing to stainless steel pipe and cap using UltraFlex Induction Heating
Ultraflex Power Technologies, USA
Alfa Laval rotary jet head GJ PF FT
Easy as this: Reduce cleaning time by 70% and operating cost by up to 80%!
Alfa Laval Kolding A/S, Denmark
The new Mosweld (SiC) system is equipped with highly-­ reliable (SiC) Silicon Carbide transistors
EMMEDI presents a new evolution of HFI Welder
Ajax Tocco Magnethermic Corporation, USA
Qwik-Freezer™ is the industry standard portable CO2 Pipe Freezing System, in use around the World
Double Freezing technique for large diameter valve replacement
Huntingdon Fusion Techniques Limited, UK
The versatile Inflatable Stoppers are used to service a wide variety of industrial applications
Inflatable Stoppers for petrochemical applications
Huntingdon Fusion Techniques Limited, UK
UKF Stainless Ltd offering the best in productivity and performance for efficient handling of tubes to the industry worldwide
UKF Stainless celebrates 25 years of offering the best in productivity and performance for efficient handling of tubes to the industry worldwide
Ultimaster, Germany
DN710 mm TOM® Pipe, PN12.5, PN16, PN20 & PN25 bar
Molecor launches into the market the new DN710 mm Oriented PVC Pipe
Molecor Tecnologia SL, Spain
The PurgEye® 300 Plus
Highest quality welds made with lower costs
Huntingdon Fusion Techniques Limited, UK
» VIEW ALL NEWS «