Largest inflatable Pipe Welding Purge System ever
PUBLISHED: 11 May 14
QuickPurge®II showing RootGlo®
Weld Butts in Pipe Diameters up to 80” diameter can now be purged using the Argweld® QuickPurge®II Inflatable Pipe and Pipeline Weld Purging Systems.
QuickPurge®II Pipe Weld Purging Systems have been designed to dramatically reduce weld purging times and deliver bright shiny oxide free welds irrespective of the size and the volume of the pipe.
A central collar between the two inflatable dams reduces the volume to be purged to a small annulus.
Around the centre of the collar is a piece of 'RootGlo®' illuminating strip that allows operators to see the centre of the purging system. RootGlo® holds its illuminating charge for 24 hours after which it can be recharged simply by exposing it to daylight for ten minutes.
The PurgeGate® accessory is fitted to all QuickPurge®II Systems. PurgeGate® is a special device that prevents the purge gas input pressure to the Inflatable Pipe Weld Purging System from rising above 7.5 psi.
Even in the event that the gas pressure rises suddenly to 50 psi by error, only 7.5 psi can be allowed through to the inflatable dams so they are unlikely to burst due to over inflation.
Another new development from the HFT development team is the IntaCal® specially developed purge valve that does not need setting like previous systems.
So inert gas is fed into the PurgeGate® system which then passes through at 7.5 psi or less to the IntaCal® valve which allows inflation of the first dam, after which inflation of the second dam takes place before surplus purge gas is passed into the purge void to eliminate air from the trapped cavity.
Using a Weld Purge Monitor®, engineers can ascertain exactly when the amount of oxygen has been reduced to an adequate level for their applications.
Because of the low vapour pressure materials that have been selected for QuickPurge®II, it is possible with these System to reach an oxygen level of better than 10 ppm to ensure that bright shiny welds are created.
Even with this significantly reduced annulus having been designed, QuickPurge®II Systems are manufactured in sizes of 6" (150 mm) diameter and upwards to 96" (2440 mm).
Safe, fast and low cost pipe freezing with Qwik-Freezer™
Glass fibre Backing Tape gives improved weld root profiles
Special high quality, leak tight welding hose for argon feed
Tight sealing Low Profile Pipestoppers for limited spaces and restricted access
Huntingdon Fusion Techniques HFT® to Exhibit at World Nuclear
Lightweight aluminium plugs for heavy-duty applications
Cut costs, not corners with QuickPurge®
Achieve high quality welds with a close eye on your weld purge
Versatile, lightweight nylon plugs for Weld Purging
Improve weld quality with a low cost Trailing Shield®
Versatile Inflatable Stoppers for pipe plugging and stopping
Improve weld quality with precision ground Tungsten Electrodes
HotPurge®, for weld purging heat-treated chrome and high strength stainless steel pipework
Inflatable Rubber Plugs: lightweight but strong and highly resistant to petrochemicals
Successful titanium welding with Flexible Welding Enclosures®