« BACK  

Innovative automated tube bending cell allows wheelbarrow manufacturer to almost double manufacturing output

This custom-designed automated production cell from Unison is helping the Walsall Wheelbarrow Company to double manufacturing output
This custom-designed automated production cell from Unison is helping the Walsall Wheelbarrow Company to double manufacturing output

The Walsall Wheelbarrow Company has installed a second custom-designed automated production cell from Unison to help meet huge demand for its unique 'barrow in a box' product. The cell is part of a new production line that makes the frames for these wheelbarrows, and fully automates all tube bending operations. Commissioned during the summer of 2105, it has enabled the company to dramatically increase manufacturing throughput - from 1800 to 3500 wheelbarrows per day.

As Jonathan Thacker, Operations Director at The Walsall Wheelbarrow Company points out, "Our first Unison production cell was the catalyst for production expansion. It enabled us to re-engineer our manufacturing operations for high volume production and freed up skilled staff for future product development. The success of our barrow in a box range is due in no small part to the manufacturing flexibility that the cell introduced. Increasing demand meant that we needed to expand capacity even further, so in 2014 we invested in a 6-robot press line for wheelbarrow pans, followed about six months later by this second Unison cell for frame manufacturing."

The Walsall Wheelbarrow Company is the only manufacturer of wheelbarrows that uses UK-only parts. It makes all of its barrow products in Wolverhampton, using an extensively automated process. The company installed its first automated production cell from Unison in early 2012. Based on an all-electric twin-head bending machine and a robotic handler, this replaced two early-generation hydraulic tube benders and a hole punching station, streamlining operations by allowing multiple processes to be performed simultaneously. Capable of fabricating almost three parts a minute, the cell helped Walsall Wheelbarrow to increase production capacity from 1500 to 1800 frames per day, whilst reducing scrap and operating costs.

Later in 2012, Walsall Wheelbarrow launched its innovative barrow in a box line of products. These are supplied in flat-pack form so that customers can easily take their purchase home with them in the boot of a car. The concept has taken the market by storm, proving so popular with retailers and customers that the company recently sought to further increase manufacturing capacity with another production line, to keep up with demand.

The new production cell comprises a tube bundle loader, tube orientation station, intermediate dual-arm loader, bending machine and a 5-axis articulated robotic handler. All five stages are controlled by a central PC. The tube bender is based on a customised 30 mm (1.25-inch) single-stack all-electric model from Unison’s Breeze range. It features a long, narrow neck and bend head that is specifically designed to facilitate precision fabrication of the tight wheel-end bend of wheelbarrow frames, without causing the tube to collide with machine architecture during the process.

Once the bundle loader's hopper has been filled and the operating program has been selected, the production cell operates entirely automatically. The bundle loader feeds tubes individually to the tube orientation station, which detects the weld seam and rotates the tube to the optimum position for bending. The tube is then transferred to the bending machine by the intermediate loader, and after being bent to shape is removed by the robotic handler and placed in a multiple rack storage scheme, ready for hole punching and powder coating.

This latest Unison cell forms an integral part of a new production line that is primarily designed to manufacture frames for Walsall Wheelbarrow’s barrow in a box products. However, the cell is programmable and can also be configured for a variety of tube bending tasks to help handle peak production of other products. Each barrow in a box frame comprises three separate parts (to facilitate compact packaging) and is fabricated from 30 mm diameter steel tubing in up to two-metre lengths. During a standard 8-hour shift, the cell is capable of producing around 1000 complete frames.

Walsall Wheelbarrow is a staunch supporter of UK manufacturing and has become a strong advocate of automation, believing that it is key to maintaining a competitive advantage. "The only other way that we could expand manufacturing capacity would be by importing ready-made parts, which is inflexible and raises quality control and scheduling issues", adds Jonathan Thacker. "We now operate the most efficient barrow production line in Europe. We have also almost eliminated hydraulic tube benders from our process, in favour of Unison's all-electric technology. This has multiple advantages, including better process consistency, higher throughput, much lower energy costs and reduced need for skilled operators. Our standard production capacity is now 2800 barrows a day - and we can easily increase this to 3500 at times of peak demand simply through extended shift working."

Because barrow in a box products are designed for easy assembly by customers, the frame parts need to be bent very accurately, with precision placement of the various bolt fixing holes. The tubes are therefore swaged prior to bending and the holes are punched afterwards, on a separate machine. The production cell's tube orientation station ensures that frames are bent in such a manner that holes are never punched through tube weld seams. This also helps to ensure process consistency, because the seam affects the spring-back characteristics of the tube during bending.

The weld seam detection system works by evaluating the magnetic flux density of the tube as it is rotated, which provides a reliable method of correctly orienting the tube prior to bending. A key advantage of this approach is that it is impervious to the prevailing light conditions, which can affect the accuracy of automated vision systems.

In addition to the Breeze machine's Unibend control software, Unison has also supplied its powerful Opt2Sim tube bending simulator. This is enabling Walsall Wheelbarrow to implement a right-first-time manufacturing strategy - eliminating scrap material and any chance of damaging parts or the bending machine - by trialling bending programs before starting production. In the first six months of use, the company has successfully developed some 20 programs for bending tubular parts for a wide range of its products.

The simulation software uses a CAD (computer aided design) model of the bending machine to generate detailed video imagery. It offers collision detection facilities, with user-adjustable parameters for real-world environmental factors such as the distances between the tube centreline and the ceiling, floor and walls of the production area, and has in-built artificial intelligence to reiterate bend cycles until a successful solution is found.

PUBLISHED: 16 Jan 16 Bookmark and Share
Company:
Unison
Country:
UK
Tel:
+44 1723 582868
Fax:
+44 1723 582379
Email:
alanp@unisonltd.com
Website:
www.unisonltd.com
Other News from Unison:

»
New head of sales & support appointed to meet Unison growth
»
Unison Ltd is increasing its manufacturing capacity and opening a new factory in Virginia, USA
»
All-electric tube bender multiplies productivity for cleaning trolley maker
»
Ultibend improves productivity with new all-electric tube benders
»
Precision tube bending takes next step in evolution
»
Innovative automated tube bending cell allows wheelbarrow manufacturer to almost double manufacturing output
»
World's most powerful all-electric pipe bending machine swings into action at Norwegian shipyard
»
Custom all-electric tube bender will accelerate right-first-time production for precision metal fabricator
»
Custom tube bender eliminates cut-off waste of tubular parts for exercise machines
»
Unison opens its own service and sales office in North Carolina
»
Accurate and cost effective tube bending - a new machine concept from Unison
»
Unison receives its Queen's Award
»
Tube bending pioneer wins Queen's Award
»
Ultra-powerful all-electric pipe bender starts operations at US shipbuilder
»
Second Unison all-electric bending machine for fast-growing tube fabrication specialist
»
Precision aerospace engineers choose Unison tube bending technology
»
Tube manipulation specialist embraces all-electric technology and enjoys fast return on investment
»
All-electric tube bending machine innovator appoints new American support partner
»
UK tube manipulation sector "in robust health" says Unison after open house event
»
Size matters: all-electric tube benders take a MASSIVE step forwards
»
Tube bending CAD/CAM software also accommodates laser tube cutting
»
Faster and smarter tubular parts production
»
Scarborough could be the UK's next 'engineering hotspot' thanks to the new University Technical College
»
Powerful all-electric pipe bending machine boosts manufacturing throughput and accuracy of large-bore hydraulic parts
»
Tube bending specialist accelerates throughput and implements right-first-time manufacturing with the help of all-electric machine
»
Advanced tube bending technology helps British Airways maintain latest-generation aircraft
»
New all-electric tube bender extends shape-forming capabilities of aerospace manufacturer
»
Tube bending leader adds new low-cost entry-point machine to its range
»
Higher-productivity tube bending to be highlighted at Tube 2014
»
Innovative tube bending CADCAM solution
»
Advanced tube benders speed construction of subsea wellhead trees
»
Proof that engineering careers still appeal to UK youngsters!
»
Novel tube bender boosts productivity by 500% for leading American tubular part fabricator
»
Higher-productivity tube bending to be demonstrated at Fabtech
»
Lord Green opens design and manufacturing facility for tube bending innovator
»
More production capacity fuels international expansion of tube bending innovator
»
World's largest all-electric pipe bender ordered by US shipbuilder
»
Record sales for tube bending machine builder Unison
»
Siemens Subsea Products adopts all-electric tube bending for production of subsea hydraulic flying leads
»
Unique robotic tube bending system can dramatically speed production
»
Clean, green production efficiency underpins tube bending machinery upgrades at leading truck parts manufacturer
»
Yorkshire's centre of engineering excellence continues investing for its future
»
Right-first-time tube bending technology to be highlighted at Farnborough
»
Business Secretary Vince Cable visits fast-growing UK machine builder
»
Novel twin-head tube/bar bender provides platform for high throughput automated production
»
Fully-automated production cell increases wheelbarrow frame manufacturing efficiency
»
Architectural metalworker achieves right-first-time output using unique bend correction system
»
Right-first-time tube bending technology to make European premiere at Tube 2012
»
All-electric tube bender provides production versatility for submarine builder
»
Scarborough plays host to hundreds of budding designers and engineers
»
Unison supports World Motorcycle Land Speed Record Attempt
»
Rotating-head tube bender produces ultra-complex part shapes in one fast automatic cycle
»
Unison to support VTube software in the UK
»
First all-electric tube bender for leading European tube bending specialist
»
Record sales for tube bending machine builder Unison
»
Precision aerospace tubular parts fabricator chooses all-electric CNC tube bender to combat emerging challenges
»
Tube bending excellence 2011
»
Integrated all-electric tube bender and cutter delivers competitive advantage to volume tubular part manufacturers
»
Architectural metalwork leader chooses right-first-time tube bender
»
Advanced tube bender will boost flexibility of performance exhaust manufacturing
»
Scarborough continues investing in the UK's engineering future
»
Metalworking machinery leader opened its doors at Scarborough engineering week
»
Boeing Integrated Defense Systems orders bending machine
»
End-former accelerates refurbishment process for automotive parts specialist
»
Advanced tooling added to tube bending portfolio


Industry News:
The PurgEye® 300 Nano
Low cost 1 PPM Weld Purge Monitor®
Huntingdon Fusion Techniques Limited, UK
Roll-Kraft Seminar Session
Outstanding attendance once again at Roll-Kraft's annual regional seminars
Roll-Kraft, USA
Brazing corrugated tubing to stainless steel pipe and cap using UltraFlex Induction Heating
Brazing corrugated tubing to stainless steel pipe and cap using UltraFlex Induction Heating
Ultraflex Power Technologies, USA
Alfa Laval rotary jet head GJ PF FT
Easy as this: Reduce cleaning time by 70% and operating cost by up to 80%!
Alfa Laval Kolding A/S, Denmark
The new Mosweld (SiC) system is equipped with highly-­ reliable (SiC) Silicon Carbide transistors
EMMEDI presents a new evolution of HFI Welder
Ajax Tocco Magnethermic Corporation, USA
Qwik-Freezer™ is the industry standard portable CO2 Pipe Freezing System, in use around the World
Double Freezing technique for large diameter valve replacement
Huntingdon Fusion Techniques Limited, UK
The versatile Inflatable Stoppers are used to service a wide variety of industrial applications
Inflatable Stoppers for petrochemical applications
Huntingdon Fusion Techniques Limited, UK
UKF Stainless Ltd offering the best in productivity and performance for efficient handling of tubes to the industry worldwide
UKF Stainless celebrates 25 years of offering the best in productivity and performance for efficient handling of tubes to the industry worldwide
Ultimaster, Germany
DN710 mm TOM® Pipe, PN12.5, PN16, PN20 & PN25 bar
Molecor launches into the market the new DN710 mm Oriented PVC Pipe
Molecor Tecnologia SL, Spain
The PurgEye® 300 Plus
Highest quality welds made with lower costs
Huntingdon Fusion Techniques Limited, UK
» VIEW ALL NEWS «