Argon Hose for your Weld Purging System
PUBLISHED: 02 Feb 16
Argon Gas Feed Hoses come complete with end fittings, providing welders with a guaranteed leak tight method of feeding non contaminated argon gas to their weld zone
It is important when welding metals such as stainless steel, titanium and zirconium that the welding zone is purged of oxygen even as low as 10 parts per million (ppm) before, during and immediately after welding, in order to achieve a clean, oxide free, zero colour weld.
Huntingdon Fusion Techniques HFT® now manufactures tailor made Argon Gas Feed Hose assemblies with leak tight fittings to attach immediately to their Argweld® range of Inflatable Tube and Pipe Weld Purging Systems at one end and to the gas source at the other.
Luke Keane, Distributor Support for HFT® said: "These special, high quality Argon Gas Feed Hoses, which can also be used for transporting nitrogen come complete with end fittings, providing welders with a guaranteed leak tight method of feeding non contaminated argon gas to their weld zone."
A selection of leak tight end fittings are provided for attaching an argon gas regulator to at one end and a 12 mm to 12 mm quick connect fitting as standard at the other end, which joins up with all HFT® Argweld® Weld Purging Systems.
All of these high quality fittings will eliminate connection difficulties and time wasting welders might experience on site.
The Argon Gas Feed Hoses can also be supplied to all other TIG / GTAW welders, with their own special fitting as required. The hoses are available off the shelf in a standard range of lengths, 30 m, 25 m, 20 m, 15 m, 10 m and 5 m.
Making up special lengths to order can be carried out in minutes with our new high-pressure end fitting compression tooling.
Conforming to British Standard BS EWN 599 Quality Standard, the Argon Gas Feed Hoses each have a temperature range from -30°C up to 80°C and a safety factor of three times working pressure, 20 bar (300 psi). Only use top quality to feed your argon gas!
Versatile, lightweight nylon plugs for Weld Purging
Improve weld quality with a low cost Trailing Shield®
Versatile Inflatable Stoppers for pipe plugging and stopping
Improve weld quality with precision ground Tungsten Electrodes
HotPurge®, for weld purging heat-treated chrome and high strength stainless steel pipework
Inflatable Rubber Plugs: lightweight but strong and highly resistant to petrochemicals
Successful titanium welding with Flexible Welding Enclosures®
PurgElite® for zero colour tube and pipe welds
Accurate stainless and titanium weld purging with the PurgEye® 200
Low cost nylon Weld Purge Plugs™
No risk of lost welds with Weld Purge Film®
Heavy-duty leak testing, sealing and stopping with Pipestoppers®
Low cost Weld Purge Monitor® for stainless steel welding
Weld Purge Dams for dished ends and short pipes
Bright, shiny, oxide-free welds with PurgExtra®