When the temperature rises, protect your Weld Purging System with new Heat Resistant Covers
PUBLISHED: 25 May 16
Heat Resistant Covers from HFT®
Weld Purging is essential when welding metal tubes and pipes made from stainless steel, titanium and zirconium, in order to achieve non-oxidised, zero colour welds.
Damaging or bursting the inflatable dams on your Tube and Pipe Weld Purging System due to exposure to high temperatures can be a thing of the past now with Argweld® Heat Resistant Covers available from Huntingdon Fusion Techniques HFT®.
Luke Keane, Distributor Support for HFT® said: "As we manufacture the HotPurge® System from 6" upwards, to be used for heated pipework up to 760°C, we decided to make a much lower cost option for companies who were only concerned about overheating the unprotected dams on our PurgElite® and PurgExtra® Systems."
"We have designed Heat Resistant Covers for both our PurgElite® and PurgExtra® Tube and Pipe Weld Purging Systems, with a temperature endurance of up to 300°C, available from 1 to 24 inches."
The Heat Resistant Covers are fixed onto the Tube and Pipe Weld Purging System with ties and holes are provided for the PurgElite® and PurgExtra® fittings, such as inlet, exhaust and crimped end. The Covers are usually provided as pairs, although they can be purchased individually in case of damage or loss.
For pipes that need to have the joints and the heat affected zones heat-treated to higher temperatures, HFT® manufactures centre extensions for both the PurgElite® and the PurgExtra® Systems so the bags sit just outside of the heated zone, where the temperature has fallen away, below 300°C.
HFT® manufactures a complete Family Range of Tube and Pipe Weld Purging Systems, including QuickPurge®, HotPurge®, PurgElite®, PurgExtra® and single Weld Purge Dams, all of which are designed to purge the contaminating gases from the rear of the joint, helping achieve zero colour welds time after time.
Many companies are still fabricating their own home made purging systems made of foam, cardboard, adhesive tape, wood and so on. Like paper, these materials contain a high percentage of water, which is undesirable to have in the presence of a weld. As these poor materials are warmed by the welding operation, they start to outgas, which when combined with the weld pool can cause porosity and oxidation.
HFT®'s Tube and Pipe Weld Purging Systems pay for themselves in the first weld, saving vast amounts of purging time and inert gas costs (Return on Investment Comparisons are available).
Weld Purge your heat-treated pipes with HotPurge®
Low cost weld purging with Weld Purge Plugs™
Highly accurate 100 ppm Weld Purge Monitor for welding stainless steel
Inflatable Welding Enclosures provide low cost argon gas shielding environment
Cost effective pipe repairs with Accu-Freeze™
Tube and pipe weld purging costs paid in one weld with PurgExtra®
Eliminate thoria by switching to MultiStrike® for safer welding
Inert shielding gas monitor for stainless steel welding
Ensure your Pipe Purging System doesn't burst with PurgeGate®
Safe, fast and low cost pipe freezing with Qwik-Freezer™
Glass fibre Backing Tape gives improved weld root profiles
Special high quality, leak tight welding hose for argon feed
Tight sealing Low Profile Pipestoppers for limited spaces and restricted access
Huntingdon Fusion Techniques HFT® to Exhibit at World Nuclear
Lightweight aluminium plugs for heavy-duty applications