New Weld Purge Monitor® with PurgeNet™
PUBLISHED: 26 Jan 17
PurgEye® 200 Weld Purge Monitor®, now with PurgeNet™
When welding metals such as stainless steel and titanium, it is essential to measure the oxygen level before, during and after welding using a Weld Purge Monitor® (oxygen analyzer).
To remain at the forefront of Weld Purging technology, World leading Weld Purging Experts and inventors of the Weld Purge Monitor®, Huntingdon Fusion Techniques HFT® are launching an updated hand-held PurgEye® 200 Weld Purge Monitor®, now with PurgeNet™.
Georgia Gascoyne, CEO for HFT® said: "PurgeNet™ allows networking to standard accessories. Typically, one accessory allows direct interface to an Orbital Welder or any other automatic welding machine, so that the oxygen level in the vicinity of the weld can be monitored and the welding machine can be switched on or off according to pre-set oxygen levels. A second accessory is a warning lamp that can signal when oxygen levels are low and high according to pre-set levels."
The revolutionary portable PurgEye® 200 is now manufactured with a new OLED (organic light emitting diode) display, which will give brighter, clearer and sharper readings for viewing at greater distances than before and at wider angles. These OLED displays are mainly symbol based not text based, which means menus are easily understandable no matter what language the user speaks.
This latest PurgEye® 200 will operate either on batteries or mains power. Charging can also be carried out from a dock (optional) and battery life will be much longer than its predecessor. Along with louder, pre-settable audio alarms for rising or falling oxygen levels, the PurgEye® 200 comes complete with a faster response long life sensor and language options.
This updated model has an integral electro mechanical pump so that it can be used to extract samples from a weld purge zone, where there is insufficient flow rate or positive pressure to activate the sensor correctly.
The PurgEye® 200 Weld Purge Monitor® reads down to 1 ppm (very accurate to 10 ppm) for the accuracy that other oxygen measuring instruments don't give. The Monitor is IP65 rated, which means it can be used in very demanding areas where instruments are used on site, such as in desert or tropical conditions. PurgeLog™ software also gives Weld Purging results to give quality control documents for each weld. The monitor also has the capability to switch between percentage oxygen and parts per million shown on the display.
Weld Purge your heat-treated pipes with HotPurge®
Low cost weld purging with Weld Purge Plugs™
Highly accurate 100 ppm Weld Purge Monitor for welding stainless steel
Inflatable Welding Enclosures provide low cost argon gas shielding environment
Cost effective pipe repairs with Accu-Freeze™
Tube and pipe weld purging costs paid in one weld with PurgExtra®
Eliminate thoria by switching to MultiStrike® for safer welding
Inert shielding gas monitor for stainless steel welding
Ensure your Pipe Purging System doesn't burst with PurgeGate®
Safe, fast and low cost pipe freezing with Qwik-Freezer™
Glass fibre Backing Tape gives improved weld root profiles
Special high quality, leak tight welding hose for argon feed
Tight sealing Low Profile Pipestoppers for limited spaces and restricted access
Huntingdon Fusion Techniques HFT® to Exhibit at World Nuclear
Lightweight aluminium plugs for heavy-duty applications