« BACK  

Save up to 60% time and 70% water with this new powerful tank cleaning machine

Alfa Laval TJ40G rotary tank cleaning machine
Alfa Laval TJ40G rotary tank cleaning machine

Fast and cost effective cleaning
Saving time and water are some of the KPIs which have the most attention in the hygienic industries. The new Alfa Laval TJ40G rotary tank cleaning machine uses a high-impact jet stream to effectively clean tough tank residues and minimize the risk of product contamination. This four-nozzle rotary jet head also cleans tanks 60% faster than static spray ball technology, which increases production uptime. And because it cleans faster, this new device uses less water and less cleaning agents thereby reducing operating costs by up to 70%.

The Alfa Laval TJ40G is capable of handling tough tank residues as well as solids up to 1mm in the cleaning fluid in tank sizes 50-1000 m3. This is particularly important for demanding process lines, such as applications within the brewhouse, where both the size and the amount of particles may be re-circulated in cleaning media before completing the cleaning cycle.

Complete self-cleaning system
Not only does the Alfa Laval TJ40G rotary tank cleaning machine provide spotless cleaning of the tank interior, it also cleans itself - inside and out.

Its hygienic self-cleaning construction ensures that the flow of the cleaning fluid reaches the exterior surfaces of the rotary jet head, as well as the critical interior components such as all bushings, bearings and inner surfaces. This minimizes the risk of product contamination and ensures a high product quality.

Alfa Laval's rotary tank cleaning machines are designed with numerous of features to ensure self-cleaning of the machine, such as directional flow from small jets in the hub that cleans the exterior of the machine. A low pressure loss over the machine provides increased cleaning efficiency compared with other tank cleaning machine running at same inlet pressure. This result in lower cleaning cost as the unit can run at lower pressure/flow compared to other tank cleaning machines.

All Alfa Laval rotary tank cleaning devices comply with Good Manufacturing Practice (GMP).

PUBLISHED: 02 Mar 17 Bookmark and Share
Company:
Alfa Laval Kolding A/S
Country:
Denmark
Tel:
+45 79 32 2200
Fax:
+45 79 32 2580
Email:
info.dk@alfalaval.com
Website:
www.alfalaval.dk
Other News from Alfa Laval Kolding A/S:

»
Easy as this: Reduce cleaning time by 70% and operating cost by up to 80%!
»
Secure performance: Prevent problems before they occur
»
Save time and lost revenue with this easy valve matrix solution
»
Secure easy selection and more uptime with new one-type-fits-all valve actuator
»
Save up to 60% time and 70% water with this new powerful tank cleaning machine
»
Want to reduce the risk of unplanned GPHE downtime? This is the best advice you will get all year
»
This is it! Don't let poor tank cleaning performance waste your time, water and energy
»
Up to 80% energy savings with gentle agitation
»
Energy efficient pumping and gentle handling of sensitive process fluids
»
Extend equipment performance with 360° service
»
Looking for superior hygiene? Meet the highest requirements with Alfa Laval diaphragm valves
»
Discover the secret of Alfa Laval FrontLine gasketed plate heat exchanger
»
Introducing hygienic pumping with more efficiency and less noise
»
Compact and easy-to-install valve control
»
Protect your employees, equipment and the environment
»
Membrane filtration with built-in advantages
»
Extend equipment performance with 360° service
»
The economic and sustainable choice
»
Unmatched mixing performance
»
Outstanding flexibility and no cross-contamination
»
Here is the premium choice in hygienic applications
»
Energy efficient powder mixing


Industry News:
The PurgEye® 300 Nano
Low cost 1 PPM Weld Purge Monitor®
Huntingdon Fusion Techniques Limited, UK
Roll-Kraft Seminar Session
Outstanding attendance once again at Roll-Kraft's annual regional seminars
Roll-Kraft, USA
Brazing corrugated tubing to stainless steel pipe and cap using UltraFlex Induction Heating
Brazing corrugated tubing to stainless steel pipe and cap using UltraFlex Induction Heating
Ultraflex Power Technologies, USA
Alfa Laval rotary jet head GJ PF FT
Easy as this: Reduce cleaning time by 70% and operating cost by up to 80%!
Alfa Laval Kolding A/S, Denmark
The new Mosweld (SiC) system is equipped with highly-­ reliable (SiC) Silicon Carbide transistors
EMMEDI presents a new evolution of HFI Welder
Ajax Tocco Magnethermic Corporation, USA
Qwik-Freezer™ is the industry standard portable CO2 Pipe Freezing System, in use around the World
Double Freezing technique for large diameter valve replacement
Huntingdon Fusion Techniques Limited, UK
The versatile Inflatable Stoppers are used to service a wide variety of industrial applications
Inflatable Stoppers for petrochemical applications
Huntingdon Fusion Techniques Limited, UK
UKF Stainless Ltd offering the best in productivity and performance for efficient handling of tubes to the industry worldwide
UKF Stainless celebrates 25 years of offering the best in productivity and performance for efficient handling of tubes to the industry worldwide
Ultimaster, Germany
DN710 mm TOM® Pipe, PN12.5, PN16, PN20 & PN25 bar
Molecor launches into the market the new DN710 mm Oriented PVC Pipe
Molecor Tecnologia SL, Spain
The PurgEye® 300 Plus
Highest quality welds made with lower costs
Huntingdon Fusion Techniques Limited, UK
» VIEW ALL NEWS «