Weld purge your heat treated pipes confidently with HotPurge®
PUBLISHED: 08 Mar 17
HotPurge® Inflatable Pipe Purging System (24 inch)
High strength steel joints must pre-heated prior to welding and also require a post-weld heat treatment. Weld joints of this nature are often purged of oxygen and welded in an inert atmosphere to reduce the risk of 'sugaring', an imperfection that could allow metal pieces to break off inside pipework and cause damage to turbines, for example.
With the high temperatures and length of time at such temperatures, most weld purging systems are unsuitable. HotPurge® has been developed by International Weld Purging Specialists Huntingdon Fusion Techniques HFT®, an Inflatable Pipe Purging System for Heat Treated Chrome and High Strength Stainless Steel Pipe Joints where the temperatures might be as high as 760°C (1,400°F) for many hours.
Luke Keane, Distributor Support for HFT® said: "HotPurge® allows the purge to be safely continued for up to 24 hours whilst pre-heating, welding and post weld heat-treating with the purge system remaining in place."
"Along with our other ranges of Inflatable Pipe Purging Systems, the HotPurge® Systems are manufactured in the UK, with scientific knowledge and research invested in each of our products. We do not sacrifice quality! You can be sure to achieve perfect welds, time and time again."
HotPurge® includes PurgeGate®, a revolutionary device to prevent over inflation of, and damage to the inflatable dams. No matter how high the user increases the pressure, in order to deliver more gas flow, PurgeGate® prevents too much pressure being delivered to the inflatable dams, allowing an increased flow, to achieve a lower oxygen level or faster cooling of the weld zone.
HotPurge® ensures the purge space remains tightly sealed at all times as the inflatable dams maintain an even seal throughout the weld cycle, irrespective of pressure rises or excessive flow rates of argon gas. The large central collar dramatically reduces the space to be purged and makes it easier to reach lower oxygen levels faster than with conventional purging systems.
Each HotPurge® System incorporates an innovative central band for easy positioning inside the pipe. This band, known as RootGlo®, will illuminate inside the dark pipe, for up to 20 hours, with only 10 minutes previous exposure to daylight.
HotPurge® Systems are manufactured to suit pipe diameters from 6 to 96" (150 to 2,440 mm) and both inflatable dams have pull handles securely sewn with high temperature resistant Kevlar thread that will withstand a pulling force of 1,000 lb.
These HotPurge® Inflatable Pipe Purging Systems can be used repeatedly for weld purging and will keep the oxygen levels below 100 parts per million (ppm) throughout the welding cycle, ensuring oxide and coke free welds, without the metallurgical imperfections caused by exposure to too much oxygen.
Weld Purge your heat-treated pipes with HotPurge®
Low cost weld purging with Weld Purge Plugs™
Highly accurate 100 ppm Weld Purge Monitor for welding stainless steel
Inflatable Welding Enclosures provide low cost argon gas shielding environment
Cost effective pipe repairs with Accu-Freeze™
Tube and pipe weld purging costs paid in one weld with PurgExtra®
Eliminate thoria by switching to MultiStrike® for safer welding
Inert shielding gas monitor for stainless steel welding
Ensure your Pipe Purging System doesn't burst with PurgeGate®
Safe, fast and low cost pipe freezing with Qwik-Freezer™
Glass fibre Backing Tape gives improved weld root profiles
Special high quality, leak tight welding hose for argon feed
Tight sealing Low Profile Pipestoppers for limited spaces and restricted access
Huntingdon Fusion Techniques HFT® to Exhibit at World Nuclear
Lightweight aluminium plugs for heavy-duty applications