« BACK  

Low cost 1 PPM Weld Purge Monitor® designed for the Process Industries

PurgEye® 300 Nano with probe hose connected
PurgEye® 300 Nano with probe hose connected

Due to the constant upward trends in Quality Control procedures, there is growing pressure on the Process Industries to carry out their welding in the absence of oxygen to an ever increasingly lower level. Metals such as stainless steel, titanium, zirconium and nickel alloys are now available to these industries to ensure the greatest strengths, the highest resistance to corrosion and of course the lowest failure rates.

These metals are commonly welded with the GTAW (TIG) process that needs the arc and its surrounding zone to be shielded with a high specification inert gas that has the minimum amount of oxygen. If the welds and their adjacent metal become oxidised, that leads to a lower resistance to corrosion and that has to be prevented.

For this purpose, Weld Purge Monitors® were invented in the 1970's to measure the oxygen levels for welding by World Leading Weld Purging Experts Huntingdon Fusion Techniques HFT®. At the time, 100 parts per million of oxygen in argon was deemed to be a good level for most stainless steel and other metals, however research shows that it has become necessary these days to try to attain a purity approaching 1 ppm of oxygen in argon when shielding the welds zones in front and behind.

Weld Purge Monitors® have been constantly redeveloped to meet changing standards and HFT® have now developed an entry level, low cost Weld Purging Monitor®, that reads down to 1 ppm, especially for the Process Industries.

This entry-level model is called the PurgEye® 300 Nano. A customer in the UK recently said: “The PurgEye® Nano is really easy to use, with excellent results. The company, which trains TIG welders on stainless steel pipes, enjoys great benefit using it. Previously, each welder would let his inert argon flow as much as possible before starting to weld, to be sure that purging was sufficient. With the PurgEye® 300 Nano they know when to reduce the argon flow prior to welding and in such a way they save a significant amount of expensive argon. Now there is no guessing! Any welders and their assistants can use the Nano after only a few minutes of receiving the instructions."

The PurgEye® Nano has been developed for weld purging where data logging, alarms and welder control are not necessarily required. It is small, lightweight and inexpensive. Developed with a unique long life sensor that has the capacity to measure oxygen down to 1 ppm (accurate to 10 ppm), boasting a sensor warm up time under 60 seconds.

With leak-tight connectors for weld purge hoses, the PurgEye® Nano can be used with optional accessory hand pump and gas sampling probe. It can be used to check purge gas quality from the main source and at the exhaust end of a purging system, as well as to find air leaks in purging hose connections anywhere in a system.

HFT® has a Family Range of PurgEye® Weld Purge Monitors® for every application. The range includes hand held, battery operated monitors and mains powered monitors, which can read oxygen levels from atmospheric concentrate, right down to 1 ppm.

Ron Sewell, Chairman for HFT® said: "All of Huntingdon Fusion Techniques HFT®'s Weld Purge Monitors® and Inflatable Tube, Pipe and Pipeline Weld Purging Systems are manufactured in the UK. We do not sacrifice on quality. We guarantee to help you achieve zero colour welds, time and time again."

PUBLISHED: 22 Mar 17 Bookmark and Share
Company:
Huntingdon Fusion Techniques Limited
Visit Huntingdon Fusion Techniques Limiteds website
Country:
UK
Tel:
+44 1554 836 836
Fax:
+44 1554 836 837
Email:
marketing@huntingdonfusion.com
Website:
www.huntingdonfusion.com
Other News from Huntingdon Fusion Techniques Limited:

»
Construction site Weld Purge Monitor®
»
Zero colour oxide free welds for manual welders
»
Tig (GTAW) welders need certainty with their welding equipment
»
New tungsten electrode grinder
»
Flexible Welding Enclosures® for Additive Manufacturing
»
Power piping perfectly purged
»
Low cost 1 PPM Weld Purge Monitor®
»
Double Freezing technique for large diameter valve replacement
»
Inflatable Stoppers for petrochemical applications
»
Highest quality welds made with lower costs
»
Handy Purge Monitor, now with PurgeNet™
»
Keeping tube and pipe joints clean when welding
»
Low cost one-way valve for specific flow rate and pressure
»
Remote monitoring of weld purge up to 1 km away
»
New Tungsten Electrode Grinder
»
Introducing PurgeNet™ and accessories
»
Weld Purging for closing welds
»
Low cost Weld Purge Monitor®
»
Effective pipe plugging in heavy-duty applications, with Aluminium Plugs
»
Accessories for Inflatable Weld Purging Systems
»
Closure welds made easy!
»
Leak testing, debris stopping and weld purging with Pipestoppers®
»
Safer and more efficient welding with MultiStrike®
»
Inflatable pipe purging systems for zero colour welds
»
Block pipes instantly and effectively with Low Profile Stoppers
»
Low cost welding accessories
»
Keep an 'Eye' on your critical welds
»
Improve weld root profiles with Backing Tape®
»
Health and safety sectors benefits from disruption-free Pipe Repair with Accu-Freeze™
»
Food and beverage industry tubes and pipes benefit from better welds
»
On-site Weld Purge Monitor® for the Petrochemical Industry
»
Weld Purging of pipes for the oil and gas industry
»
Weld Purge Monitor® for the Nuclear Industry
»
Fire sprinkler systems - Easy valve replacement with Qwik-Freezer™
»
Flexible Welding Enclosure® for welding titanium and nickel alloy
»
On-site Weld Purge Monitor® with PurgeNet™
»
Low cost 1 PPM Weld Purge Monitor® designed for the Process Industries
»
Leak tight pipe plugging for the oil & gas industry
»
Weld purge your heat treated pipes confidently with HotPurge®
»
Purge with extra options
»
World Standard Weld Purge Monitor®
»
Safer pipe Weld Purging for closing welds
»
Successful gas tungsten arc welding with MultiStrike®
»
Rapid purge your pipes with QuickPurge®
»
New Weld Purge Monitor® with PurgeNet™
»
Single ended Purge Dams
»
Safer welding with MultiStrike®
»
Flexible Welding Enclosure® for welding down to 10 ppm
»
Keep a low cost 'eye' on your weld purge
»
QuickPurge® your pipes for perfect welds
»
We have the key to your perfect weld purge
»
Welding of vacuum tubing and piping
»
No lost purge during welding
»
Pipe plugging and blocking of all shapes and sizes with Pipestoppers®
»
Launch of new Weld Purge Monitors® at Fabtech 2016
»
Indian success with weld purging of titanium alloy pipe
»
Weld purge your pipes the "Elite" way
»
Switch to MultiStrike® for an improved and safer Tungsten Electrode performance
»
Fast purging of heat-treated pipework
»
Freeze sealing for pipe repairs with Qwik-Freezer™
»
Introducing super heavy duty Weld Backing Tape™
»
Pipe Welding becomes easier
»
Extended inert gas coverage during titanium and stainless steel welding
»
Inflatable Stoppers for pipe plugging and blocking
»
Measure your Argon for the best Weld Quality
»
Weld Purge your pipes at a low cost with Weld Purge Film®
»
Dramatically reduce Weld Purging times with QuickPurge®
»
Switch to MultiStrike® for an improved Tungsten Electrode performance
»
Flexible Welding Enclosures® for zero colour titanium welds
»
Weld purge your pipes the 'Elite' way
»
Monitor your Weld Purge at a low cost
»
Weld Backing Tape™ for weld purging
»
Weld purging company provides first class service
»
No disruption to pipe repair with Accu-Freeze™
»
Nylon Plugs for maintenance work
»
Pipes welded faster
»
Significant increase to your Weld Purge Monitor's sensor life
»
Major petrochemical company uses Flexible Welding Enclosure®
»
Smallest ever Weld Trailing Shield®
»
When the temperature rises, protect your Weld Purging System with new Heat Resistant Covers
»
We have the key to your perfect weld purge
»
PurgExtra® tube and pipe purging system
»
Keep a distant 'Eye' on your Purge
»
Ensure your Weld Purging System doesn't burst
»
Block pipes instantly and effectively with Pipestoppers®
»
Welding World Award Winner
»
Fast purging of heat-treated pipework
»
For your PurgEyes® only
»
Purge your tube and pipes the Elite way
»
Flexible Welding Enclosures®, ultra low cost welding chambers
»
Use Backing Tape™ for perfect weld underbeads
»
Bright, oxide free welds with Trailing Shields®
»
Nylon Weld Purge Plugs for weld Purging
»
Keep an Eye on your Weld Purge
»
The use of water soluble Weld Purge Film™ for pipe purging
»
Freeze sealing for pipe repairs with Qwik-Freezer™
»
Argon Hose for your Weld Purging System
»
Do not put your welds at risk
»
Out with the old and in with the new
»
Inflatable Stoppers come in many shapes, sizes and material
»
QuickPurge® your pipes for perfect welds
»
Keep your Eye on the Purge
»
Freeze sealing for pipe repairs with Accu-Freeze®
»
Flexible Welding Enclosures® - ideal for the welding of titanium and zirconium
»
Bright, clean, high quality welds with Trailing Shields®
»
PurgExtra™ tube and pipe purging system
»
Keep a distant 'Eye' on your Purge
»
Freeze sealing for pipe repairs with Qwik-Freezer®
»
Mechanical pipe sealing plugs
»
PurgElite® inflatable tube and pipe weld purging system
»
We have the key to your perfect weld
»
The use of Weld Purge Film® for Pipe Purging
»
MultiStrike® Tungsten Electrodes offer safer, cheaper TIG welding
»
Ensure your Weld Purging System doesn't overinflate by using a PurgeGate® Valve
»
Inflatable Pipestoppers, where access to the job site is difficult
»
Weld Purging provides the cleanest, highest quality and lowest cost welds ever!
»
QuickPurge® high speed pipe purging system
»
Weld Purge Dams
»
Flexible enclosure welding
»
PurgExtra™ pipe weld purging system
»
HFT white paper: Remote Weld Purge Monitoring
»
Upgraded high speed pipe purging system
»
Pipe sealing plugs and stoppers
»
Low cost pipe weld purging system (for purging hot sections)
»
Keeping it clean with Argweld® Flexible Weld Purging Enclosures®
»
Largest inflatable Pipe Welding Purge System ever
»
Weld Purge Monitor® Family gets new addition
»
HotPurge™ pipe purging systems for pre-heated pipe welding
»
Return on Investment QuickPurge®II
»
QuickPurge® II
»
Launch of Argweld Pipe Weld Purging Systems® for tube, pipe and pipeline industries
»
Weld Purge Monitor improved to read down to 1 part per million
»
Fabtech/AWS annual exhibition was a great success for Huntingdon Fusion Techniques this year
»
Financial Director appointed at HFT
»
New style 'Weld Purge Monitor'™
»
The PurgEye® 300 Nano Weld Purge Monitor™
»
Complete family of 'Weld Purge Monitors™'
»
Orbital welding purge plug kits
»
Grapes or Sugaring? Pipe Weld Root defects can be a thing of the past
»
New white paper published - "Why Post Weld Purging is necessary"
»
New white paper published - "Why use a Weld Purge Monitor"
»
Launch of new Tube and Pipe weld purge systems™
»
PurgEye® 100 Weld Purge Monitor - comprehensive version
»
Weld purging systems


Industry News:
Professional O-ring tool kit
First aid for technicians: Professional O-ring tool kit
Firma C Otto Gehrckens GmbH & Co KG (COG), Germany
Construction site Weld Purge Monitor®
Construction site Weld Purge Monitor®
Huntingdon Fusion Techniques Limited, UK
Metalube is making a big investment into the Düsseldorf show this year with the addition of the new stand at Tube 2018
Two stands for Metalube in Düsseldorf
Metalube Ltd, UK
COG Resist® - The new high-tech FFKM compounds from COG
COG Resist® - The new high-tech FFKM compounds from COG
Firma C Otto Gehrckens GmbH & Co KG (COG), Germany
Ajax TOCCO sells new EMMEDI MosWeld SiC HFI Welder on display at Fabtech - Chicago
Ajax TOCCO sells new EMMEDI MosWeld SiC HFI Welder
Ajax Tocco Magnethermic Corporation, USA
Two special flat models with one standard flat model
Zero colour oxide free welds for manual welders
Huntingdon Fusion Techniques Limited, UK
A new high-tech compound for the valves sector and gas industry
FKM seal material Vi 840 - A breakthrough in the valves sector and gas industry
Firma C Otto Gehrckens GmbH & Co KG (COG), Germany
Un-brazing and re-brazing copper angle brackets to copper strips at 1400°F (760°C) in less than a minute using UltraFlex Induction Heating
Un-brazing and re-brazing copper angle brackets to copper strips at 760°C in less than a minute
Ultraflex Power Technologies, USA
Fine Tubes gears up for the recovery of the oil and gas industry
Fine Tubes gears up for the recovery of the oil and gas industry
Fine Tubes Limited, UK
SigmaTEK Systems reported a record-breaking Fabtech Expo
Manufacturing is Looking Good for 2018
SigmaTEK Systems, LLC, USA
» VIEW ALL NEWS «