« BACK  

On-site Weld Purge Monitor® for the Petrochemical Industry

Close-up of the PurgEye® Site
Close-up of the PurgEye® Site

Welding within the Petrochemical Industry involves working in refineries and plants that produce gasoline and a variety of other petroleum-based products as well as chemicals and oil-related products. Welded joints in these applications are often critical and the insides of pipework must be purged with expensive argon gas to reduce the oxygen levels around the joint below 100 ppm.

Due to the challenges of welding on-site in the Petrochemical Industry, Weld Purging Experts Huntingdon Fusion Techniques HFT® have designed a virtually non-destructible Weld Purge Monitor® for on-site conditions. The PurgEye® Site is a guarded oxygen monitor in a secure, safe, waterproof and dustproof, very tough carry case.

Ron Sewell, Chairman for HFT® said: "The PurgEye® Site measures oxygen levels from 1,000 ppm, right down to 1 ppm (accurate to 10 ppm). It is portable, robust and has been specifically designed for site conditions. The housing case for the monitor is IP65 with the lid open and IP68 rated with the lid closed."

"The PurgEye® Site has a new design, fast response, long life sensor and it is equipped with PurgeNet™ facility that allows it to connect to a variety of accessories. One of the accessories is a link to an automatic welding machine, which allows controls to be based upon the oxygen level, to prevent welding if that level is too high. Other accessories include a traffic light visual indication system and a temperature gauge."

The large, bright, OLED display allows the data to be easily read and is mainly symbol based, rather than text. The display does not need a backlight and can be viewed from greater angles than LED screens.

Oxygen levels can be indicated by the PurgEye® Site gas analyser in parts per million (ppm) or percentage, depending on user preference. Flow detection ensures accurate reading of gas samples, along with a blocked filter icon and power on / off with a standby button for sensor warm up.

The small, low volume, almost indestructible case, can be carried anywhere and the PurgEye® Site used either with its internal battery, which lasts up to 10 hours or connected to mains electricity from 90 - 250 v, single phase A.C.

By using the PurgEye® Site, welders can ensure non-oxidised, zero colour welds are achieved regardless of conditions. Using a Weld Purge Monitor® also eliminates guesswork and saves considerable costs by preventing loss of argon.

The Weld Purge Monitor® was invented by HFT® in the 1970's and with over 40 years of innovation, design and manufacturing experience, the company now has a Family of PurgEye® Weld Purge Monitors® to measure oxygen levels from atmospheric content (20.94%) down to 1 ppm (accurate to 10 ppm).

Ron Sewell continues by saying: "All of Huntingdon Fusion Techniques HFT®'s Weld Purge Monitors® and Inflatable Tube, Pipe and Pipeline Weld Purging Systems are manufactured in the UK. We do not sacrifice on quality. We guarantee to help you achieve zero colour welds, time and time again. The Company has immense technical collateral gathered and published, that the Welding and Engineering Fraternity can access, rely on and use to solve many of the difficulties experienced while purging welds."

PUBLISHED: 04 May 17 Bookmark and Share
Company:
Huntingdon Fusion Techniques Limited
Visit Huntingdon Fusion Techniques Limiteds website
Country:
UK
Tel:
+44 1554 836 836
Fax:
+44 1554 836 837
Email:
marketing@huntingdonfusion.com
Website:
www.huntingdonfusion.com
Other News from Huntingdon Fusion Techniques Limited:

»
Versatile, lightweight nylon plugs for Weld Purging
»
Improve weld quality with a low cost Trailing Shield®
»
Versatile Inflatable Stoppers for pipe plugging and stopping
»
Improve weld quality with precision ground Tungsten Electrodes
»
HotPurge®, for weld purging heat-treated chrome and high strength stainless steel pipework
»
Inflatable Rubber Plugs: lightweight but strong and highly resistant to petrochemicals
»
Successful titanium welding with Flexible Welding Enclosures®
»
PurgElite® for zero colour tube and pipe welds
»
Accurate stainless and titanium weld purging with the PurgEye® 200
»
Low cost nylon Weld Purge Plugs™
»
No risk of lost welds with Weld Purge Film®
»
Heavy-duty leak testing, sealing and stopping with Pipestoppers®
»
Low cost Weld Purge Monitor® for stainless steel welding
»
Weld Purge Dams for dished ends and short pipes
»
Bright, shiny, oxide-free welds with PurgExtra®
»
Inert gas welding monitor
»
Freeze it and make your pipe repair easy with Accu-Freeze™
»
Weld Backing Tape® saves grinding time and costs
»
Construction site Weld Purge Monitor®
»
Zero colour oxide free welds for manual welders
»
Tig (GTAW) welders need certainty with their welding equipment
»
New tungsten electrode grinder
»
Flexible Welding Enclosures® for Additive Manufacturing
»
Power piping perfectly purged
»
Low cost 1 PPM Weld Purge Monitor®
»
Double Freezing technique for large diameter valve replacement
»
Inflatable Stoppers for petrochemical applications
»
Highest quality welds made with lower costs
»
Handy Purge Monitor, now with PurgeNet™
»
Keeping tube and pipe joints clean when welding
»
Low cost one-way valve for specific flow rate and pressure
»
Remote monitoring of weld purge up to 1 km away
»
New Tungsten Electrode Grinder
»
Introducing PurgeNet™ and accessories
»
Weld Purging for closing welds
»
Low cost Weld Purge Monitor®
»
Effective pipe plugging in heavy-duty applications, with Aluminium Plugs
»
Accessories for Inflatable Weld Purging Systems
»
Closure welds made easy!
»
Leak testing, debris stopping and weld purging with Pipestoppers®
»
Safer and more efficient welding with MultiStrike®
»
Inflatable pipe purging systems for zero colour welds
»
Block pipes instantly and effectively with Low Profile Stoppers
»
Low cost welding accessories
»
Keep an 'Eye' on your critical welds
»
Improve weld root profiles with Backing Tape®
»
Health and safety sectors benefits from disruption-free Pipe Repair with Accu-Freeze™
»
Food and beverage industry tubes and pipes benefit from better welds
»
On-site Weld Purge Monitor® for the Petrochemical Industry
»
Weld Purging of pipes for the oil and gas industry
»
Weld Purge Monitor® for the Nuclear Industry
»
Fire sprinkler systems - Easy valve replacement with Qwik-Freezer™
»
Flexible Welding Enclosure® for welding titanium and nickel alloy
»
On-site Weld Purge Monitor® with PurgeNet™
»
Low cost 1 PPM Weld Purge Monitor® designed for the Process Industries
»
Leak tight pipe plugging for the oil & gas industry
»
Weld purge your heat treated pipes confidently with HotPurge®
»
Purge with extra options
»
World Standard Weld Purge Monitor®
»
Safer pipe Weld Purging for closing welds
»
Successful gas tungsten arc welding with MultiStrike®
»
Rapid purge your pipes with QuickPurge®
»
New Weld Purge Monitor® with PurgeNet™
»
Single ended Purge Dams
»
Safer welding with MultiStrike®
»
Flexible Welding Enclosure® for welding down to 10 ppm
»
Keep a low cost 'eye' on your weld purge
»
QuickPurge® your pipes for perfect welds
»
We have the key to your perfect weld purge
»
Welding of vacuum tubing and piping
»
No lost purge during welding
»
Pipe plugging and blocking of all shapes and sizes with Pipestoppers®
»
Launch of new Weld Purge Monitors® at Fabtech 2016
»
Indian success with weld purging of titanium alloy pipe
»
Weld purge your pipes the "Elite" way
»
Switch to MultiStrike® for an improved and safer Tungsten Electrode performance
»
Fast purging of heat-treated pipework
»
Freeze sealing for pipe repairs with Qwik-Freezer™
»
Introducing super heavy duty Weld Backing Tape™
»
Pipe Welding becomes easier
»
Extended inert gas coverage during titanium and stainless steel welding
»
Inflatable Stoppers for pipe plugging and blocking
»
Measure your Argon for the best Weld Quality
»
Weld Purge your pipes at a low cost with Weld Purge Film®
»
Dramatically reduce Weld Purging times with QuickPurge®
»
Switch to MultiStrike® for an improved Tungsten Electrode performance
»
Flexible Welding Enclosures® for zero colour titanium welds
»
Weld purge your pipes the 'Elite' way
»
Monitor your Weld Purge at a low cost
»
Weld Backing Tape™ for weld purging
»
Weld purging company provides first class service
»
No disruption to pipe repair with Accu-Freeze™
»
Nylon Plugs for maintenance work
»
Pipes welded faster
»
Significant increase to your Weld Purge Monitor's sensor life
»
Major petrochemical company uses Flexible Welding Enclosure®
»
Smallest ever Weld Trailing Shield®
»
When the temperature rises, protect your Weld Purging System with new Heat Resistant Covers
»
We have the key to your perfect weld purge
»
PurgExtra® tube and pipe purging system
»
Keep a distant 'Eye' on your Purge
»
Ensure your Weld Purging System doesn't burst
»
Block pipes instantly and effectively with Pipestoppers®
»
Welding World Award Winner
»
Fast purging of heat-treated pipework
»
For your PurgEyes® only
»
Purge your tube and pipes the Elite way
»
Flexible Welding Enclosures®, ultra low cost welding chambers
»
Use Backing Tape™ for perfect weld underbeads
»
Bright, oxide free welds with Trailing Shields®
»
Nylon Weld Purge Plugs for weld Purging
»
Keep an Eye on your Weld Purge
»
The use of water soluble Weld Purge Film™ for pipe purging
»
Freeze sealing for pipe repairs with Qwik-Freezer™
»
Argon Hose for your Weld Purging System
»
Do not put your welds at risk
»
Out with the old and in with the new
»
Inflatable Stoppers come in many shapes, sizes and material
»
QuickPurge® your pipes for perfect welds
»
Keep your Eye on the Purge
»
Freeze sealing for pipe repairs with Accu-Freeze®
»
Flexible Welding Enclosures® - ideal for the welding of titanium and zirconium
»
Bright, clean, high quality welds with Trailing Shields®
»
PurgExtra™ tube and pipe purging system
»
Keep a distant 'Eye' on your Purge
»
Freeze sealing for pipe repairs with Qwik-Freezer®
»
Mechanical pipe sealing plugs
»
PurgElite® inflatable tube and pipe weld purging system
»
We have the key to your perfect weld
»
The use of Weld Purge Film® for Pipe Purging
»
MultiStrike® Tungsten Electrodes offer safer, cheaper TIG welding
»
Ensure your Weld Purging System doesn't overinflate by using a PurgeGate® Valve
»
Inflatable Pipestoppers, where access to the job site is difficult
»
Weld Purging provides the cleanest, highest quality and lowest cost welds ever!
»
QuickPurge® high speed pipe purging system
»
Weld Purge Dams
»
Flexible enclosure welding
»
PurgExtra™ pipe weld purging system
»
HFT white paper: Remote Weld Purge Monitoring
»
Upgraded high speed pipe purging system
»
Pipe sealing plugs and stoppers
»
Low cost pipe weld purging system (for purging hot sections)
»
Keeping it clean with Argweld® Flexible Weld Purging Enclosures®
»
Largest inflatable Pipe Welding Purge System ever
»
Weld Purge Monitor® Family gets new addition
»
HotPurge™ pipe purging systems for pre-heated pipe welding
»
Return on Investment QuickPurge®II
»
QuickPurge® II
»
Launch of Argweld Pipe Weld Purging Systems® for tube, pipe and pipeline industries
»
Weld Purge Monitor improved to read down to 1 part per million
»
Fabtech/AWS annual exhibition was a great success for Huntingdon Fusion Techniques this year
»
Financial Director appointed at HFT
»
New style 'Weld Purge Monitor'™
»
The PurgEye® 300 Nano Weld Purge Monitor™
»
Complete family of 'Weld Purge Monitors™'
»
Orbital welding purge plug kits
»
Grapes or Sugaring? Pipe Weld Root defects can be a thing of the past
»
New white paper published - "Why Post Weld Purging is necessary"
»
New white paper published - "Why use a Weld Purge Monitor"
»
Launch of new Tube and Pipe weld purge systems™
»
PurgEye® 100 Weld Purge Monitor - comprehensive version
»
Weld purging systems


Industry News:
Pipestoppers® Nylon Plugs in action
Versatile, lightweight nylon plugs for Weld Purging
Huntingdon Fusion Techniques Limited, UK
Xiris opens European office to better support local customers
Xiris opens European office to better support local customers
Xiris Automation Inc., Canada
Trailing Shield®. in action on titanium tube
Improve weld quality with a low cost Trailing Shield®
Huntingdon Fusion Techniques Limited, UK
Metalube gains OHSAS 18001 certificate
Hat Trick of Awards as Metalube gains OHSAS 18001
Metalube Ltd, UK
Located in Knoxville, TN, AIM Equipment supplies and services CNC tubing benders and related equipment
Safety is the highest priority for AIM Equipment
AIM Equipment Inc, USA
84 inch Inflatable Stopper
Versatile Inflatable Stoppers for pipe plugging and stopping
Huntingdon Fusion Techniques Limited, UK
Roll-Kraft's new print and digital 'Break Free' campaign highlights Roll-Kraft's efforts to free up customer choice
Roll-Kraft launches campaign to help customers 'break free' from tooling suppliers
Roll-Kraft, USA
Fine Tubes will be exhibiting its range of high quality tubes at OTC on Booth 461
Under pressure? 60,000psi high performance tubes at the Offshore Technology Conference
Fine Tubes Limited, UK
TEG-1000 Tungsten Electrode Grinder
Improve weld quality with precision ground Tungsten Electrodes
Huntingdon Fusion Techniques Limited, UK
UltraFlex SmartPower Compac
UltraFlex announces the release of their breakthrough SmartPower Compac Systems
Ultraflex Power Technologies, USA
» VIEW ALL NEWS «