« BACK  

Molecor launches into the market the new DN710 mm Oriented PVC Pipe

DN710 mm TOM® Pipe, PN12.5, PN16, PN20 & PN25 bar
DN710 mm TOM® Pipe, PN12.5, PN16, PN20 & PN25 bar

TOM® Pipes goal is to intelligently manage the water resources using new technologies for the design of high-pressure water pipelines.

The company increases in this way the possibilities of networks design with diameters that guarantee the effectiveness in the required pressure and flow; which implies important cost savings thanks to a revolutionary manufacturing technology that provides efficient and environmentally friendly systems to manufacture Oriented PVC pipes.

Molecor develops highly efficient solutions for the conveyance of water under pressure, in order to provide the best technical and economical alternative for networks design.

The molecular orientation process provides the TOM® Pipe with exceptional mechanical and hydraulic characteristics compared to pipelines manufactured with other materials existing in the market. Among these characteristics we can highlight: its higher hydraulic capacity, enabling the conveyance of higher volumes of water for the same diameter; its lightness, which makes it unnecessary the use of machinery up to big diameters, being easier the manipulation and installation of pipes up to DN250 mm; its better response to water hammer due to its lower celerity and its excellent impact resistance. The watertightness, another characteristic of these pipes, avoids leaks and, therefore, water losses, which would reduce the volume of water supplied.

Applied to pressure pipelines it is achieved a pipe of a great resistance, both mechanical and chemical, and therefore with a very long useful life.

This series of features provide solutions oriented to optimize the available water resources and to reduce energy costs in water infrastructures.

The pipe is manufactured in a wide range of nominal pressures (12.5, 16, 20 and 25 bar) and diameters: from DN90 to DN800 mm.

The company already achieved an important milestone becoming the worldwide pioneer in the manufacturing of DN 500, 630 and 800 mm Oriented PVC Pipes. Since its foundation and in order to be a world reference in the development of technology for the manufacture of pipes, Molecor bets clearly for innovation, research and development to provide the water supply market with innovative solutions and to meet the challenges that the market presents today.

PUBLISHED: 28 Sep 17 Bookmark and Share
Company:
Molecor Tecnologia SL
Country:
Spain
Tel:
+34 902 566 577
Fax:
+34 902 566 578
Email:
info@molecor.com
Website:
www.molecor.com
Other News from Molecor Tecnologia SL:

»
The Molecor-Titán Consortium launches new industrial plant in Paraguay
»
Molecor launches into the market the new DN710 mm Oriented PVC Pipe
»
Molecor at Pipes XI in South Africa
»
TOM® Mechanical Calculation Program
»
Molecor expands its PVC-O production capacity in South Africa
»
Molecor to present at the 2017 Plastic Pipes in Infrastructure Congress
»
Molecor repeats attendance at the 7th edition of Vinyl India
»
Molecor participates in the irrigation project of Arroyo de Calamonte
»
Molecor develops the first fittings in PVC-O
»
Presented at K2016: M-OR-P 5012 System that manufactures PVC-O pipes up to DN1200 mm
»
Molecor© improves new functionalities in the TOM® Mechanical Calculation Program
»
New 'Technical Manual for Water Network Design and Use' TOM® Oriented PVC pipe
»
Molecor© launches the new Oriented PVC Pipe DN125 mm
»
Molecor© celebrates 10 years
»
Molecor launches new website
»
The technology developed by Molecor arrives in Kazakhstan
»
Molecor will be present at the XVII Plastic Pipes Conference
»
Molecor, presented its latest news in PVC-O at the Vinyl India Conference
»
Molecor enters South East Asia Water Pipe Market with local production of PVC-O pipes
»
Molecor plans partnership in Malaysia
»
Molecor (SEA) Sdn Bhd
»
Driving PVC-O technology ahead during K-2013: PVC-O pipes DN 800 mm/30" and PVC-O fittings
»
Solvin Awards: Molecor obtained the gold prize for innovation
»
Molecor: finalist in the Solvin Awards 2013
»
Molecor milestones. From K-2007 to K-2013
»
Molecor to represent Spain in Europe's most competitive business awards competition
»
Molecor, beyond the standard concept of remote assistance
»
Molecor joins VinylPlus
»
Molecor receives the Entrepreneur XXI Award
»
Molecor doubles its annual turnover, Innovation and Internationalisation being the keys for success
»
Molecor at Plastivision Arabia 2012
»
Molecor participates as exhibitor and speaker at NPE 2012
»
Molecor technology yields rentability to the water industry with its new technology for PVC-O pipes
»
Latest PVC-O pipe production equipment


Industry News:
New Samsung SL-65MC/1000 Turning Center
installed at Chicago Roll Company
Roll-Kraft adds CNC machine to Chicago Roll Company
Roll-Kraft, USA
Weld Purge Film® in action
No risk of lost welds with Weld Purge Film®
Huntingdon Fusion Techniques Limited, UK
RT-4000S single-sided turkshead straightener with 2-Axis motorized adjustment
​Rafter Ships RT-4000S Sgl Turkshead with motor adjust
Rafter Equipment Corp, USA
The Steel Plugs Range is specifically designed for heavier duty applications such as long immersion in water, for use at higher temperatures or for contact with acidic or alkaline environments
Heavy-duty leak testing, sealing and stopping with Pipestoppers®
Huntingdon Fusion Techniques Limited, UK
From top: Fin pass stand & welding head; Turks head stands; Forming unit
Universal Forming Line
Adda Fer Meccanica Srl, Italy
PurgEye® 100 in use
Low cost Weld Purge Monitor® for stainless steel welding
Huntingdon Fusion Techniques Limited, UK
The Weld Purge Dams are fitted with a dual inflation and purge hose, an additional purge gas hose and an exhaust which can be connected to one of the HFT® Weld Purge Monitors®
Weld Purge Dams for dished ends and short pipes
Huntingdon Fusion Techniques Limited, UK
HFT® have developed PurgExtra®, for purging tube and pipe joints from 1 - 24
Bright, shiny, oxide-free welds with PurgExtra®
Huntingdon Fusion Techniques Limited, UK
JPC have agreed that they would take over the EET 'bending cells' and keep jobs in Coventry
New year - new boost to local economy!
The Joint Perforating Company Ltd (JPC), UK
The innovative PurgEye® Desk is leading the way in inert gas purging technology by reading oxygen levels from 1,000 ppm, right down to levels as low as 1ppm
Inert gas welding monitor
Huntingdon Fusion Techniques Limited, UK
» VIEW ALL NEWS «