« BACK  

Ajax TOCCO sells new EMMEDI MosWeld SiC HFI Welder

Ajax TOCCO sells new EMMEDI MosWeld SiC HFI Welder on display at Fabtech - Chicago
Ajax TOCCO sells new EMMEDI MosWeld SiC HFI Welder on display at Fabtech - Chicago

Ajax TOCCO Magnethermic recently sold a new EMMEDI MosWeld SiC HFI welder which was displayed publicly for the first time at the FABTECH show in Chicago 2017. The welder will be installed in the Midwest, USA in early December.

This new SiC welder will forever change the face of HFI welding technology. Using high-current capable SiC (Silicon Carbide) transistor technology, the EMMEDI MosWeld SiC system delivers the same frequencies as former Mosfet units.

However, what sets this unit apart from other Mosfet units, is that the SiC Mosfet's only require four semiconductors versus 36 of the traditional Mosfet transistors, per 100 kW of power.

This particular 500 kW MosWeld SiC unit has 16 Mosfets versus 180 Mosfets required of traditional solid-state Mosfet HFI welders. The SiC Mosfet transistor frequency rating is 150 - 500 kHz, which is the ideal frequency for most HFI welding applications.

Previously, IGBT transistors were the only transistor with high-current capability. Their maximum frequency range of 150 kHz, as defined by the device manufacturers, is on the lower end of the ideal frequency range required for most HFI welding applications.

The new Emmedi MosWeld SiC from AjaxTocco is the first HFI welder to operate at the optimum HFI welding frequency range for most HFI welding applications, with high-current capable SiC Mosfet transistors.

Ajax TOCCO Magnethermic®, a subsidiary of ParkOhio Holdings Corp.®, designs and manufactures world-class induction heating and melting equipment for various industries and applications throughout the world. In addition, the Company provides a range of services including laboratory process development, preventive maintenance, equipment repair, and parts, coil repair facilities and installation services through its locations in North America, South America, Europe and Asia.

PUBLISHED: 06 Dec 17 Bookmark and Share
Company:
Ajax Tocco Magnethermic Corporation
Country:
USA
Tel:
+1 330 372 8511
Fax:
+1 330 372 8608
Email:
info@ajaxtocco.com
Website:
www.ajaxtocco.com
Other News from Ajax Tocco Magnethermic Corporation:

»
Ajax TOCCO sells new EMMEDI MosWeld SiC HFI Welder
»
EMMEDI presents a new evolution of HFI Welder
»
Ajax Tocco Magnethermic – Shanghai awarded contract for induction heating furnace


Industry News:
Professional O-ring tool kit
First aid for technicians: Professional O-ring tool kit
Firma C Otto Gehrckens GmbH & Co KG (COG), Germany
Construction site Weld Purge Monitor®
Construction site Weld Purge Monitor®
Huntingdon Fusion Techniques Limited, UK
Metalube is making a big investment into the Düsseldorf show this year with the addition of the new stand at Tube 2018
Two stands for Metalube in Düsseldorf
Metalube Ltd, UK
COG Resist® - The new high-tech FFKM compounds from COG
COG Resist® - The new high-tech FFKM compounds from COG
Firma C Otto Gehrckens GmbH & Co KG (COG), Germany
Ajax TOCCO sells new EMMEDI MosWeld SiC HFI Welder on display at Fabtech - Chicago
Ajax TOCCO sells new EMMEDI MosWeld SiC HFI Welder
Ajax Tocco Magnethermic Corporation, USA
Two special flat models with one standard flat model
Zero colour oxide free welds for manual welders
Huntingdon Fusion Techniques Limited, UK
A new high-tech compound for the valves sector and gas industry
FKM seal material Vi 840 - A breakthrough in the valves sector and gas industry
Firma C Otto Gehrckens GmbH & Co KG (COG), Germany
Un-brazing and re-brazing copper angle brackets to copper strips at 1400°F (760°C) in less than a minute using UltraFlex Induction Heating
Un-brazing and re-brazing copper angle brackets to copper strips at 760°C in less than a minute
Ultraflex Power Technologies, USA
Fine Tubes gears up for the recovery of the oil and gas industry
Fine Tubes gears up for the recovery of the oil and gas industry
Fine Tubes Limited, UK
SigmaTEK Systems reported a record-breaking Fabtech Expo
Manufacturing is Looking Good for 2018
SigmaTEK Systems, LLC, USA
» VIEW ALL NEWS «