Stainless steel tube fitting manufacturer improves productivity with Unison all-electric tube benders

PUBLISHED: 06 Aug 18

All-electric tube bending machine
All-electric tube bending machine

Two all-electric tube bending machines from Unison Ltd are helping Ultibend Industries to increase the manufacturing productivity of stainless steel tube fittings for the food and beverage processing systems at their manufacturing facility in Wellington, New Zealand.

Ultibend purchased two customised tube bending machines to suit their proprietary manufacturing process, the machines from Unison automate the bending of tube fitting shapes such as elbows and U-bends, in sizes from 1/2 to 4 inches in diameter. Manufacturing operations have demonstrated that the Unison tube bending machines have significantly boosted their manufacturing speed compared with their previous hydraulic bending machines.

Together, these benders are involved in making all Ultibend Industries bends in the sizes 1/2 inch to 4-inch diameter. Since installation their 130mm single stack tube bender has produced 320,912 bends and the 80mm Single stack tube bending machine bender that works on the smaller sizes has made 558,441 bends. Bends from these tube benders go to projects around New Zealand, Australia and the US, especially dairy factories, breweries, and in some cases to the automotive industry.

As the company expanded, it became essential to upgrade the bending process and replace the original in house built hydraulic bending machines with modern, low maintenance and reliable all-electric tube bending machines, using software-controlled servomotor-controlled bending. "We knew of Unison ltd as we had had dealings with them in the past. We like that being software engineers, Unison could take our ideas and issues and come up with a tailored solution in the form of a customer specific machine. They're also an ethical company whose values aligned with our own. This has been proved in our dealings with them with the excellent support and prompt response to issues we have." Linc Turley, Director at Ultibend Industries.

Describing some of the key advantages to Unison's solution, he adds: "The Unison software has been invaluable as opposed to our old hydraulic system, the all-electric servo driven machines give us greater control over bend parameters and increased accuracy (can meet standards consistently). All the data (i.e. pressure values, mandrel position) is captured and automatically adjusted to the correct position during set up as opposed to manual adjustments. This gives us the ability to put lower skilled operators on these machines, as doing set ups and making adjustments is more straight forward. It is also a lot easier and faster to make minor adjustments to the bender settings via a program rather than having to manually adjust threads. This saves us time on difficult products, as we make minor adjustments to get the required quality finished product."

Ultibend Industries sell their tube fittings to merchants in New Zealand, Australia and the United States who then supply the end user. Their bends are commonly used in wineries, breweries and dairy factories all around New Zealand, California and Australia as well as the automotive and architectural industries in the form of exhausts, other car parts and handrails.

Why Ultibend Love their Unison benders as opposed to their old hydraulic bending machines:

  • Higher accuracy and consistency, once a size is set up changes to the bend angle and pressure setting do not have to be made like they had to with the hydraulic benders.
  • Electric servos increase flexibility in the running of benders. They can easily vary how far the clamps open for loading, alter the loading positions for 45-degree programs etc
  • Less maintenance time spent fixing hydraulic leaks
  • Safety feature written into the software make the machines MUCH safer than the old hydraulic benders

About Ultibend Industries
Ultibend Industries is a New Zealand based company specialising in the manufacture and supply of world class stainless steel tube fittings. The company originated in the early 90's and throughout the years, has grown into a multinational conglomerate known for its impeccable service and high-quality product. Quarter of a century later, Ultibend has developed a Multinational; company with a talented team committed to reaching new levels of excellence.

Ultibend, along with UPG Pipe Systems and ES3 is part of Satius Group, formed to strengthen the individual companies' values and vision.

Over its lifetime, the company has steadfastly preserved its passion for satisfying customers with affordable fittings that are both technically and aesthetically superior. Every individual is personally dedicated to upholding the vision that oversaw Ultibend's birth in 1992: 'to fulfil a desire for high quality product at a competitive price, with world class customer care.'

The company caters to a wide range of industries, including food and beverage processing, particularly in the dairy industry) marine, architecture and cosmetic production.

Unison Ltd, UK
Tel: + 44 1723 582868
Email: sales@unisonltd.com
Web: www.unisonltd.com

More news from this company:
Stainless steel tube fitting manufacturer improves productivity with Unison all-electric tube benders
Leading seat manufacturer chooses Unison tube bending technology
Fourth Unison bending machine for leading aircraft component manufacturer
Leading tube and pipe fabrication specialists invest in 7th Unison tube bender
Unison Ltd is thrilled to invite you to Tube Düsseldorf 2018
Unison Ltd and Pneuform Machines Ltd announce joint venture
New head of sales & support appointed to meet Unison growth
Unison Ltd is increasing its manufacturing capacity and opening a new factory in Virginia, USA
All-electric tube bender multiplies productivity for cleaning trolley maker
Ultibend improves productivity with new all-electric tube benders
Precision tube bending takes next step in evolution
Innovative automated tube bending cell allows wheelbarrow manufacturer to almost double manufacturing output
World's most powerful all-electric pipe bending machine swings into action at Norwegian shipyard
Custom all-electric tube bender will accelerate right-first-time production for precision metal fabricator
Custom tube bender eliminates cut-off waste of tubular parts for exercise machines